Picture it, you wake up one Sunday morning and suddenly realize that the old toilet in your bathroom needs to be replaced! You had ignored its leaky seal and cracked bowl for far too long.
After several hours of research online and consultation with friends, you know that removing your existing tub and replacing it with a new one is the only option.
But what lies ahead – how complicated will this job be? What preparation should you take before tackling this task? I’ll discuss these questions in today’s blog post so that removing toilets will seem like a manageable project by the end!
Is It Easy To Remove A Toilet?
Removing a toilet is certainly no easy feat; depending on the model, it can take several hours and require quite a bit of technical know-how.
How Much Should It Cost To Remove A Toilet?
Depending on the required work, toilet removal can be inexpensive or cost more. A standard situation may include the following:
- Turning off your water.
- Draining the toilet.
- Loosening the bolts that attach it to the floor.
After doing so, a professional will carefully remove the toilet so it can be disposed of properly. The disposal fee may vary from location to location; however, estimates show that an average toilet removal service costs between $150-300.
Hiring experienced professionals for this task is essential to avoid any potential problems associated with incorrectly removing a toilet.
Also Read:
How Much Does It Cost To Flush A Toilet
Do Hotels Charge You For Clogging The Toilet
How Long Does It Take To Remove A Toilet?
Removing a toilet can take an hour to a day, depending on the circumstances. Preparing properly before attempting to remove one is important, as it requires patience and knowledge of plumbing systems.
If you are not an experienced plumber, I must suggest hiring one to do the job for you. They will have the necessary tools and expertise needed for this task.
Careful steps must be taken during the removal process to prevent damage to water lines and other parts of the bathroom.
If done correctly, the toilet should come out cleanly without any incidents. All-in-all, removing a toilet can be time-consuming, but with proper preparation and care, it will be a successful endeavor.
How Do You Remove A Toilet Fast | Step By Step Procedure
Tools And Material You Need
Removing a toilet is no fun, but it can be made much easier if you follow the right steps and have the right tools ready at your disposal.
When taking out an old toilet, rubber gloves are one of the most important materials you’ll need; they will keep your hands clean while working and give you a better grip as you move around in tight spaces.
A plunger also comes in handy for loosening up clogs during this assembly. Pliers are essential to ensuring that any nuts or bolts attached to the toilet can be solved easily without corrupting them.
Use cardboard tiles or an old blanket before starting demolition to protect your floor from damage and make it easier when lifting the toilet out of place.
Finally, always strap the new toilet securely to keep it tightly in place. With these tools and materials on-hand and enough patience, there won’t be anything standing between you and that newly installed commode!
How To Remove A Toilet | Procedure
Removing a toilet is relatively easy, but it takes effort and the right approach to complete it correctly. There are several steps involved in removing a toilet, but first, you must ensure the water supply has been shut off. After the water is turned off, these steps should be followed:
Step 1: Put on rubber gloves and grab your tools – You’ll need an adjustable wrench or pliers to loosen up the bolts that attach the tank and bowl of your toilet.
A flathead screwdriver will also come in handy for prying apart stuck parts. Wear rubber gloves when handling any of these tools, as they may have previously been exposed to bacteria-filled sewage materials!
Step 2: Disconnect the supply hose – Before attempting to remove anything from your bathroom floor, use an adjustable wrench or pliers to turn counterclockwise and disconnect both ends of your toilet’s supply hose from their respective fixtures (tank and wall). Once disconnected, lay them aside, so they don’t get in your way during removal!
Step 3: Remove all remaining nuts/bolts connecting the tank & bowl – Using either an adjustable wrench or pliers again (depending on what type of nut/bolt you have).
Unscrew each one before moving on removing any other pieces with a flathead screwdriver if necessary (like plastic covers).
Keep nuts and bolts separate; you will likely need them later for re-installation!
Step 4: Release wax seal ring – After all remaining nuts/bolts have been removed from connection points between the tank & bowl, use a putty knife or flathead screwdriver carefully pry around the circumference of where the wax seal ring is located until it comes loose enough for easy maneuvering by hand out completely.
This seal prevents leaks while keeping pipe connection secure at the same time too… so be extra careful here lifting it out without damaging anything nearby too much!
Step 5: Lift & move the entire unit away – Now that everything else has come apart easily enough using the above steps (including the sealing ring).
Grab securely underneath the potty itself with two hands and lift steadily up a straight vertical position until loosened entirely; then set aside with caution until ready for disposal elsewhere such as garbage bin outside, etc.
Thankfully, this should do the trick of getting rid of any existing toilets fast without unnecessary messes.
Also Read:
How To Remove Blue Stains From Toilet Seat
How To Remove Harpic Stains From Toilet Seat
Bottom Line
So, there you have it. The next time someone asks how long it takes to replace a toilet, you can give them a handy dandy answer backed by science! And if anyone ever tells you that the job should take less than two hours, feel free to call them out. They’re probably wrong.