Once there was a blockage in my macerator toilet that had been causing me a great deal of frustration. The sound of the macerator toilet gurgling and groaning in frustration was enough to send shivers down my spine.
I had tried the usual tricks, plunging and unclogging it with a chemical, but nothing seemed to work.
I was about to give up and call a plumber when I remembered something my father said when I was a kid – that there was one surefire way to clear a blocked macerator toilet.
What followed was a journey of trial and error, but eventually, I found success. In this blog, I will share with you the tricks I used to unblock my macerator toilet so that you can save the expense of a plumber.
What Is Macerator Toilet?
Let’s begin our blog from the very beginning. I know most people have no idea about what a macerator toilet is.
Well, a macerator toilet uses a macerator pump to grind up solid waste and flush it through a small pipe, making it an ideal choice for bathrooms with limited space.
This technology is highly efficient and can easily enable a single toilet to handle multiple users.
It works by grinding solid waste into tiny particles that pass through the pipe and are flushed away.
This allows for a much higher rate of water efficiency than traditional toilets and the ability to flush several times without the need to refill the bowl.
Macerator toilets are becoming increasingly popular in modern bathrooms, as they are easy to install and maintain and are much more efficient than traditional toilets.
How Do I Know My Macerator Toilet Is Blocked?
If you have a macerator toilet, I am sure you must have fae blockage problems. If your macerator toilet is blocked, there are several signs you can look for that will indicate that the toilet needs to be unblocked.
- Firstly, you may notice that the toilet is taking a while to flush, or you may hear a loud gurgling sound after you flush.
- Additionally, a strong smell may come from the toilet, or you may notice water seeping out of the tank or bowl.
- Finally, if you take the lid off the macerator, you may notice that the macerator is not spinning freely and is instead jammed with debris.
If any of these signs are present, then it is likely that your macerator toilet is blocked, and it will need to be unblocked to prevent any further damage.
Reasons Which Block a Macerator Toilet
As you all know, a macerator toilet uses a macerator pump to grind up waste and send it to the sewer line.
However, there are several reasons why a macerator toilet may become blocked. Let me tell you five of the most common reasons:
1. Foreign Objects: People sometimes try to flush things down the toilet that shouldn’t be flushed. This includes paper towels, feminine hygiene products, and even children’s toys. These foreign objects can block the macerator pump and cause it to malfunction.
2. Too Much Waste: Too much waste in the toilet can cause the macerator pump to overwork and eventually break down. This is why it’s essential only to flush human waste and toilet paper down the toilet.
3. Clogged Sewer Line: If the sewer line is clogged, it can cause the macerator toilet to become blocked. The pump will have to work harder to send the waste through the clogged sewer line.
4. Malfunctioning Pump: If the macerator pump itself is malfunctioning, it can cause the toilet to become blocked. This is usually due to a build-up of foreign objects or a clog in the pump.
5. Power Outage: If there is a power outage, the macerator pump cannot operate, and the toilet will become blocked. This is usually a temporary problem that can be fixed by restoring power to the area.
How To Clear A Blocked Macerator Toilet | Step By Step Guide
Now it is time to come to this blog’s main topic: clear a blocked macerator toilet. Yes, if your macerator toilet is blocked, don’t despair!
This is a common problem that can easily be fixed independently (in most cases). Let me show you how to clear a blocked macerator toilet step by step.
Step 1: First, try to flush the toilet. If the water doesn’t go down, the blockage is probably in the macerator. Turn off the power to the toilet (usually, there’s a switch on the wall near the toilet).
Step 2: Then remove the lid of the macerator unit. There are two ways to clear a blockage in a macerator: manually or with a plunger.
If you’re going to try to clear the blockage manually, be very careful! The blades in the macerator are very sharp.
Step 3: To clear the blockage manually, first, find the blockage. It should be near the blades. Use a pair of pliers to grab the blockage and pull it out.
Step 4: If you can’t reach the blockage, you may need to disassemble the macerator to get to it. If you try to clear the blockage with a plunger, make sure that the plunger is big enough to cover the entire opening of the macerator.
Step 5: Put the plunger over the opening and push and pull the plunger up and down. Be sure to keep a tight seal so that all the suction goes into the macerator.
Step 6: Once you’ve cleared the blockage, reassemble the macerator and turn the power back on.
Step 7: Now flush the toilet to ensure the blockage is gone. If the toilet still doesn’t flush properly, you may need to call a plumber.
Will a Plunger Unblock a Macerator?
If you are thinking of unblocking the blockage of a macerator with a plunger then let me tell you there are better ways than this one.
In some cases, a plunger can be used to unblock a macerator. However, it is usually not the best tool for the job.
If a plunger is used, it should be done carefully and with the right type of plunger to ensure that it does not damage the macerator. If the problem persists, it is best to call a professional plumber to help.
How Do You Unblock A Saniflo Macerator?
What about the Saniflo macerator toilet blockage? Relax; if you have a blocked Saniflo macerator, there are a few steps you can follow to unblock it.
Step 1: First, you will need to ensure that nothing is blocking the inlet or outlet of the macerator. If there is, you can try to remove the blockage with a plunger or a plumber’s snake.
Step 2: If the blockage is not at the inlet or outlet, it will likely go further down the line. In this case, you must disassemble the macerator to get to the blockage.
Step 3: Turn off the power to the macerator and disconnect the inlet and outlet pipes. Then, remove the screws that hold the housing together and carefully take the housing apart.
Step 4: Once you can access the blockage, try removing it with a plunger or a plumber’s snake. If the blockage is stubborn, you may need to use a more robust tool, such as a hydro jetter.
Step 5: If you are not comfortable disassembling the macerator or cannot remove the blockage, you will need to call a plumber.
Cleaning Of Macerator Toilet
Can I Put Bleach Down A Macerator Toilet?
If you are thinking of cleaning your macerator toilet with bleach, you must think again because you should not put bleach down a macerator toilet. Bleach will damage the rubber seals and hoses inside the macerator and can cause severe damage to the toilet.
Additionally, bleach should never be added to the water in a toilet since it can corrode the internal mechanisms and cause blockages.
To keep your macerator toilet running smoothly, use a mild cleaner explicitly designed for use in toilets, and run a regular cleaning cycle to keep it free of dirt and debris.
Can You Use Vinegar In A Macerator Toilet?
And what about vinegar? As many people use it to keep their toilets clean and fresh. So can you use vinegar in a macerator toilet? Sure, you can use vinegar in a macerator toilet! The best way to do this is to flush the toilet before pouring a cup of vinegar into the bowl.
The vinegar will break down any soap and mineral deposits that build up over time, helping keep your macerator toilet in good working order.
Remember to flush the toilet again after the vinegar has had a chance to work. Doing this periodically will help keep your macerator toilet running smoothly.
How Do You Drain A Macerator?
If you have a macerator in your home, you may wonder how to drain it properly. So now, let’s look at a step-by-step guide on how to drain a macerator.
Step 1: The first step is to turn off the power to the macerator. This can be done by flipping the unit’s switch or unplugging it from the outlet.
Step 2: Next, you must remove the waste from the macerator. This can be done by opening the unit and scooping the waste with a spoon or other utensil.
Step 3: Once the waste has been removed, you must flush the macerator with water. This can be done by running the water from the faucet directly into the unit.
Step 4: Once the water has been running through the macerator for a few minutes, you can turn the power back on and allow the unit to finish draining.
Step 5: Finally, you will need to clean the macerator. This can be done by wiping the inside of the unit with a damp cloth.
Following these steps, you should have no problem draining your macerator. If you have further questions, please consult the owner’s manual for your specific model.
How Long Does a Macerator Toilet Last?
Now you know that Macerator toilets are great for small spaces, but how long do they last? Well, with proper care and maintenance, a macerator toilet could last anywhere from 10-15 years.
That’s a reasonable amount of time; if you take good care of it, you could get even more out of it.
To ensure it lasts, clean it regularly, replace the seals, and check the blades for any wear and tear. With that, you’ll be able to enjoy your macerator toilet for many years!
In conclusion, unblocking a macerator toilet is a relatively simple process. With the right tools and some elbow grease, it is possible to clear a macerator toilet of debris and blockage.
However, if the blockage is too severe, it is best to consult a professional plumber. With the proper knowledge and skill, they can quickly and safely clear the toilet and get it working again.