How To Flush a Toilet With a Bucket Of Water – Basic Skill 

Have you ever faced a situation where your toilet flush won’t work, and you have to flush the toilet at any cost? Well, if yes, then cheer up! Because this article brings a solution to facing such kind of intense situation. You don’t have to do anything technical or tricky you have to learn how to flush a toilet with a bucket of water. As simple as it sounds.

If you’re having trouble getting your toilet to flush correctly, or it just won’t let you go any further, you may need to try flushing with a bucket of water. This will help get the toilet moving and ensure that it flushes properly.

To flush a toilet with a bucket of water, you need to fill it with enough water to cover the toilet bowl and then dump it into the toilet. Repeat this process until the toilet is clear of all waste products that are in there, and then you’re all done.

How Much Water Do You Need To Flush A Toilet?

Firstly, when you flush a toilet with a bucket of water, you must know how much water you need. How much water you need to flush a toilet depends on what kind of toilet you have, how much waste it takes to fill up the bowl, and how big your tank is.

The average flush uses about 3-5 gallons of water, but some toilets use less than a gallon per flush. This means that if you have a smaller tank and more frequent flushes, you’ll need more water each time.

But this number is about the toilet flushing mechanism, but here we are doing to flush with a bucket of water. Then how much water will you need? 

If you’ve ever tried to flush a toilet with a bucket of water, you know it’s not easy. And if you’re doing it on purpose (for some reason), it’s probably more challenging than you thought.

The truth is that flushing a toilet isn’t like putting out a campfire—you can’t just dump the whole bucket in there and expect the job to be done. Instead, you must pour the water slowly and give it time to work its magic.

But how much water do you need? It depends on the size of your bucket and your toilet. If you’re using a 5-gallon bucket, then two things will affect how much water you should use: how big your toilet is and how efficiently it flushes.

You probably need to start by pouring about 1/2 gallon into the bowl from an angle that ensures some water goes down into the trap (the tube beneath your bowl). Then wait 15 minutes for gravity to do its thing before flushing again with another 1/2 gallon. Repeat until all of the water has been flushed away.

You can also read our blog how much water to flush a toilet to gain more information related this topic.

How To Flush a Toilet With a Bucket Of Water | Step By Step Procedure

Flushing a toilet with a bucket of water is a great way to eliminate excess water in your toilet’s tank. If you’re having trouble getting your toilet to flush correctly, try flushing it with a bucket of water. 

You’ll need:

  • A large bucket (a 5-gallon bucket will work best)
  • Water (Off- course)

Now to flush a toilet with a bucket of water, you will need to follow these steps:

Step 1: First, remove the lid from your toilet tank.

Step 2: Next, place the bucket underneath your toilet bowl and fill it with water until it’s about half full.

Step 3: Then, remove the float ball from your overflow tube (you can do this by rotating it counterclockwise). The overflow tube is located on the side of your tank—it’s where all the water will go when you flush your toilet so that it doesn’t flood your bathroom floor.

Step 4: Now that you’ve removed the float ball from your overflow tube, you can use it to plug any holes in your toilet bowl where waste may leak out into other parts of the house.- If there aren’t any holes in your toilet bowl, skip this step.

Step 5: Finally, pour a bucket of water and allow water to flow down into your toilet bowl until there is enough liquid sitting inside so that it will flush adequately without overflowing onto other surfaces around there, like floors or walls (we recommend using warm or hot water here because cold can freeze on pipes if they’re not appropriately insulated).

Related Articles:

How To Flush Toilet If Water Is Off

How To Flush Toilet Without Handle

How To Manually Flush An Automatic Toilet

how To Flush Toilet (Detailed Guide)

Some Precautions While Flushing a Toilet With A Bucket Of Water

If you are flushing your toilet with a bucket of water, be sure to take these precautions:

  • Make sure that your toilet is empty before you begin. If there is still any waste in the bowl, dump it and dispose of it properly.
  • Make sure that all other drains in your house are closed as well, including sinks and tubs.
  • Use distilled water from an outside source because the chlorine in tap water could damage your plumbing system.
  • Use a 5-gallon bucket and have it ready before turning off the water supply to your toilet. Make sure you have enough storage space for this amount of water (and more if needed).
  • Make sure that your bucket is clean. You don’t want to dump dirty water into the toilet and contaminate it further. Then, fill the bucket with lukewarm water (not too hot or cold) and pour it into the bowl slowly. Don’t rush this process—you want to ensure that the water gets down into all parts of the toilet bowl and that everything gets flushed out.
  • At last, be careful not to splash water on yourself or anyone else while pouring.


In conclusion, knowing how to flush a toilet with a bucket of water is essential because it can help you in an intense situation and saves you from embarrassment. If you are having trouble flushing a toilet with water, then using a bucket of water to flush it would be a good idea. This will help to break the blockage and allow the toilet to work correctly again.

Leave a Comment