I can’t count the times I’ve found myself needing to figure out how to flush a toilet that doesn’t have a plunger. We’ve all been there. If you ever find yourself in a situation where you need to remove bathroom waste and don’t have access to a plunger, some simple tricks will allow you to remove bathroom waste easily. Let me show you.
To unclog a toilet without a plunger: First, remove any foreign objects from the toilet bowl (like toilet paper, hair, etc.). Then, pour 1 cup of baking soda and 1 cup of vinegar down the bowl. Let this sit for 30 minutes. Afterward, flush the toilet several times to rinse out the mixture.
Does A Toilet Get Clogged On Its Own?
A toilet can get clogged on its own, but it’s not something you should expect. A toilet can get clogged on its own, especially if you have a lot of hair or other debris (like baby wipes) in the bowl.
The most common reason a toilet gets clogged is when you flush things that are too big, like rags or paper towels. These objects can quickly become stuck in the pipe and leave everything else behind.
Another reason is when you use too much toilet paper or put toilet paper in the wrong spot. If you use too little, the water will be able to carry it through fast enough that it won’t clog anything up. But if you use too much or put it in the wrong spot (like right near the opening), then you could end up with a clog too.
Sometimes people think they need to run water into their toilet after they flush because it will help clear out whatever’s stuck there – this isn’t true! It makes things worse because all of that extra water creates more pressure inside the bowl, which can cause even more problems than before.
Also read our blog: How To Flush A Clogged Toilet
How To Flush Toilet Without Plunger | 5 Ways
Way 1: Pour Hot Water
If you’ve ever had to deal with clogged toilets, you probably know how frustrating it can be. The only thing worse than dealing with a clogged toilet is not knowing how to unclog it. If you’re looking for an easy way to flush the toilet without using the plunger, try this method next time:
Pour hot water down the toilet. You can use any hot water—the more you pour in, the better it will work.
Wait for a few seconds and then flush again. If hot water doesn’t work independently, repeat this process until everything has worked through the pipes and out of your toilet bowl.
For more info read our blog: How To Flush Toilet When Pipes Are Frozen
Way 2: Try Dish Soap
If you’re experiencing a clogged toilet and don’t have a plunger around, there’s another solution that may work just as well, which is using dish soap. But how can you do this? Let me tell you.
- Pour some dish soap into the toilet bowl as you would with a traditional plunger.
- Use a cup or small bucket to pour water after the dish soap has been added. Make sure to use warm water if possible!
- Gently pour the water into the bowl until it reaches the level of the drain hole at the bottom of your toilet.
- Wait for about 10 minutes and then flush as usual.
Way 3: Give a Try To Epsom Salts
How many of you know that Epsom salts can help flush your toilet without a plunger? I bet there are few people out there who know about that. But yes, it’s true, Epsom salts are the ultimate solution to your toilet troubles.
If you’ve ever had to use a plunger, you know it’s not one of the most pleasant parts of home maintenance. It’s also not something we like to do repeatedly, especially since our toilets tend to get clogged regularly.
But now that I’ve found out about Epsom salts, you no longer have to worry about clogged toilets — or plunge them. Epsom salts are an all-natural way to unclog your toilet without using chemicals or harsh cleaners. And they work fast.
How do they work? Epsom salts are magnesium sulfate crystals that naturally draw moisture out of the air and into the water inside your toilet bowl. This makes the water more dense and heavy, so it sinks into the drain pipes where it belongs instead of floating back up again.
It’s as simple as dumping one cup of Epsom salts into your toilet bowl before bedtime every night for about two weeks straight and then flushing away all those nasty clogs! The results are amazing — no more plunging for us.
Way 4: How About DIY Drain Snake (Wire Hanger)
If you’re looking for a DIY way to unclog your toilet without a plunger, try using a drain snake (a wire hanger). I was shocked by this DIY technique for the unclogged toilet when I first tried it, and I am sure you will too.
Here’s how you can do this.
- Get a wire hanger and bend it into a U shape with the open end facing down so that it fits snugly inside the toilet bowl.
- Lower the U into the toilet and push it down until it reaches the bottom of the pipe (you may need to tip your toilet bowl slightly for this). This will allow water to flow from your toilet and into your U-shaped drain snake.
- Pull up on one end of the wire hanger until it pulls itself out of your drain pipe, then repeat with the other end. You should now have an empty sink.
Way 5: Mixture Of Baking Soda
Another easiest solution to flush a toilet without a plunger is a mixture of baking soda and vinegar. It works great because it helps break down whatever is clogging your toilet without using a plunger.
Here’s what you need:
-1 cup of baking soda
-1 cup of white vinegar (if it’s colored, make sure it’s clear)
-A bucket or container with holes in the bottom (a colander or strainer will work well)
Mix the baking soda and vinegar in a bucket or container with holes in the bottom. Pour this mixture into your toilet bowl, then let it sit for about 10 minutes. After 10 minutes, flush the toilet again. You should see that all of your problems have been cleared up.
Things You Need To Avoid While Flushing Toilet Without Plunger
Now It would be better if I also discuss some of the things you need to avoid while flushing the toilet without a plunger to save your toilet from any damage.
Do Not Pour Bleach Into The Toilet Bowl
Bleach can damage the surface of your toilet and make it discolored. It can also corrode and weaken pipes in your home, causing water to leak into areas where you don’t want it to go (like through your neighbor’s kitchen).
You can use bleach for cleaning toilets, but only after carefully reading instructions on how much bleach to add and how long you should leave it in place before rinsing out with water. The instructions will tell you which type of brush to use and when there’s no point in trying any longer—if all else fails, try another method.
Do Not Go For Drain Cleaning Liquid
Some people believe using drain cleaning products to flush out the toilet is a good idea, but this is not true. Using such products can cause damage to your toilet bowl, and it does not solve the problem. Things will get worse if you use drain cleaning liquid on your toilet.
Avoid Toilet Bowl Cleaner At All Cost
You should avoid using toilet bowl cleaners at all costs. It is an acidic solution that can damage the porcelain and other parts of your toilet. If you don’t believe me, look at the ingredients of popular brands like Lysol and Clorox. You will find sodium hypochlorite in their list of chemicals used for cleaning toilets.
Toilet bowl cleaners also harm your skin and eyes if they get in contact with them accidentally. You might experience severe irritation on your skin or eye redness if you accidentally splash any amount on these body parts while flushing your toilet without a plunger.
Never Use Strong Acidic Chemical Cleaners
It would be best never to use strong acidic chemical cleaners to flush the toilet. The solid acidic cleaners can damage the toilet bowl or rubber flapper, causing leaks in your pipes.
Conclusion
In conclusion, if you are experiencing toilet problems and don’t have a plunger, the abovementioned ways can be adequate to help you flush a toilet without a plunger. These ways will help clear out any blockages and prevent bacteria from growing.